---
title: A7.2 Physical entry
description: "ISO 27001 A7.2 Physical entry is all about **managing who can physically enter areas where sensitive information or IT infrastructure is located**. It's not enough to have walls and doors—this control ensures that **only authorized individuals** can pass through those…"
url: "https://iso27001pro.com/docs/a7-2-physical-entry/"
updated: "2025-12-16"
category: ISO 27001 A.7 Physical Controls
tags:
  - A7.2 Physical entry
---

# A7.2 Physical entry

ISO 27001 A7.2 Physical entry is all about **managing who can physically enter areas where sensitive information or IT infrastructure is located**. It's not enough to have walls and doors—this control ensures that **only authorized individuals** can pass through those doors, and that their access is **tracked, limited, and monitored**.

Think of it like this: Your office might be the castle, but without a guard at the gate and logs of who comes and goes, anyone could walk in and compromise your entire information system.

## Implementation Guidance

1. **Access Control Systems**

- Install controlled access systems like:
- Electronic key card readers
- PIN pads
- Biometric authentication (e.g., fingerprint, facial recognition)

Only **authorized personnel** should be granted access based on their job role and necessity.

1. **Visitor Management**

- Maintain a **visitor logbook or digital check-in system**.
- Issue temporary ID badges or access cards.
- Ensure **visitors are always escorted** within secure areas.
- Clearly label areas that are **off-limits to visitors**.

1. **Surveillance and Monitoring**

- Use **CCTV cameras** to monitor entry and exit points.
- Store footage securely and define a retention period (commonly 30–90 days).
- Regularly check and test your monitoring systems for uptime and performance.

1. **Entry Logs and Review**

- Keep digital or manual logs of:
- Who accessed which area
- When they accessed it
- Duration of stay (if applicable)
- Review access logs periodically to detect any anomalies.

1. **Segmentation of Areas**

- Divide your office or facility into **zones** based on sensitivity:
- General work area
- Restricted area (e.g., HR, Finance)
- Highly sensitive area (e.g., server room, backup storage)

Each zone should have increasing levels of access control.

## Best Practices

- **Limit “tailgating”** by installing anti-passback systems or turnstiles.
- Use **motion sensors** or **alarms** in sensitive areas during off-hours.
- Immediately **revoke access** for employees who leave the organization.
- **Audit access lists** at least quarterly to ensure only active staff have entry rights.

## Audit Readiness

**Documents to Maintain:**

- Physical security policy and access control procedures
- Access control system configuration records
- Visitor logs (manual or digital)
- Surveillance system details (coverage, retention policy)
- Access review reports

**Auditors will check:**

- Whether physical access is **restricted and documented**
- If **entry logs and access rights** are regularly reviewed
- If **visitor procedures** are being followed
- Whether **incident response plans** cover physical breaches

## Common Pitfalls

- **Shared access cards** among employees
- **Unattended visitor access** or open doors
- **Failure to review access logs**
- **No controls after working hours**

## ISO 27001 Control Attributes

 

| **Control** | **Attribute Value** |
| --- | --- |
| ** ** **A.7.1 Physical Security Perimeter A.7.2 Physical Entry Controls** | Preventive, Physical, Operational |
| **Purpose** | Ensure only authorized individuals can physically access secure areas |
| **Applicability** | All offices, data centers, and restricted zones |
| **ISO 27001 Domains** | Physical and Environmental Security |

 

Physical entry control is about **watching the gates**—you wouldn’t leave your front door wide open, right? The same goes for your data center, server closet, or confidential records room. Always ensure **access is limited, monitored, and auditable**.
